| Anchors - Drive Pin type |
1 |
| Anchors - Drop In style - Steel & Stainless |
1 |
| Anchors - Easy Screw In style - Plastic & Die Cast Zinc |
1 |
| Anchors - Hammer Drive - Steel / Zinc Alloy |
1 |
| Anchors - Lag Screw Shield |
1 |
| Anchors - Lead Wood Screw |
1 |
| Anchors - Machine Screw |
1 |
| Anchors - Nail In Pin Drive - Nylon |
1 |
| Anchors - Plastic - Fluted, Light Duty |
1 |
| Anchors - Plastic Hollow Wall - Conical, Light Duty |
1 |
| Anchors - Plastic Hollow Wall - Ribbed with Lip |
1 |
| Anchors - Plastic Toggle |
1 |
| Anchors - Single & Double Expansion |
1 |
| Anchors - Sleeve - Acorn Nut style |
1 |
| Anchors - Sleeve - Flat & Threshold Flad heads |
1 |
| Anchors - Sleeve - Hex Nut & Washer style |
1 |
| Anchors - Sleeve - Rod Hanger |
1 |
| Anchors - Sleeve - Round head |
1 |
| Anchors - Sleeve - Tie Wire |
1 |
| Anchors - Split Drive - Flat & Pan heads |
1 |
| Anchors - Steel Hollow Wall - Regular & Drive Style |
2 |
| Anchors - Wedge (ICBO Approved) - Steel & Stainless |
2 |
| Bit Holders - (used w/ insert & power bits) |
1 |
| Broaching Type Studs - Flush Head - Phosphor Bronze |
1 |
| Cap Screws, Slotted Flat |
1 |
| Carriage Bolts, Flat Hd - Square Neck - Grade-2 & Grade-5 |
1 |
| Carriage Bolts, Round Hd - Fin Neck |
1 |
| Carriage Bolts, Round Hd - Ribbed Neck |
1 |
| Carriage Bolts, Round Hd - Short Neck |
1 |
| Carriage Bolts, Round Hd - Square Neck - Gr-5, Gr-8 & 18-8 Stainless |
2 |
| Carriage Bolts, Round Hd - Square Neck - Low Carbon Steel & HotDip Galv |
1 |
| Clinch Studs - Flush Head - 12-Rib style |
3 |
| Concrete Screws - Hex & Flat head |
1 |
| Deck Screws - Steel & Stainless - Thread & Material Specs |
1 |
| Dowel Screws |
1 |
| Drive Screws - Type U, Round head - Head, Thread & Material Specs |
1 |
| Drywall Screws - Framing Screw-Sharp Point - Head, Thread & Material Specs |
1 |
| Drywall Screws - High-Low Thread - Thread & Material Specs |
1 |
| Drywall Screws, Coarse Thread - and Particle Board Screws - Thread & Material Specs |
1 |
| Drywall Screws, Fine Thread - Sharp & Self-Drill Points - Thread & Material Specs |
1 |
| Drywall Screws, Trim Head - Phillips and Square Drives - Head, Thread & Material Specs |
1 |
| Elevator Bolts |
1 |
| Eye Bolts, Forged - Plain & Shoulder Patterns |
2 |
| Flange Screws - Serrated Hex Washer |
1 |
| Flange Screws - Twelve Point |
1 |
| Frame Bolts - Hex Washer - Grade-8 Alloy |
1 |
| Hanger Bolts |
1 |
| Heavy Hex Bolts - Type A307, Grades A & B - Low Carbon Steel |
1 |
| Heavy Hex Cap Screws - Low Carbon Steel |
1 |
| Heavy Hex Structural Bolts - ASTM A325 & ASTM A490 |
2 |
| Hex Cap Screws - Grade-2 & Stainless Steel |
2 |
| Hex Cap Screws - Grade-5 & Grade-8 |
2 |
| Hex Machine Bolts - Hot Dip Galvanized |
2 |
| Insert Bits - Phillips - Extra Hard |
1 |
| Insert Bits - Pozidriv (Type 1A drive) |
1 |
| Insert Bits - Slotted |
1 |
| Insert Bits - Square Recess |
1 |
| Insert Bits - Torx(R) |
1 |
| Lag Screws, Hex Head - Steel, Stainless & HotDip Galv |
1 |
| METRIC Carriage Bolts - Short Neck - ISO 8678 & DIN 603 |
1 |
| METRIC Carriage Bolts - Square Neck (large) - ISO 8677 & DIN 603 |
1 |
| METRIC Full Thread Hex Cap Scr - Grade A & B, Class 8.8 & 10.9 - ISO 4017 & DIN 933 |
2 |
| METRIC Hex Bolts - Grade A & B, Class 8.8 & 10.9 - ISO 4014 & DIN 931 |
2 |
| METRIC Machine Screws - Head Dimensions- Flat - ISO 7046-1 & 2009 DIN 965&963 |
1 |
| METRIC Machine Screws - Head Dimensions- Oval - ISO 7047 & 2010 DIN 966 & 964 |
1 |
| METRIC Machine Screws - Head Dimensions- Pan - ISO 7045 & 1580 DIN 85 & 7985 |
1 |
| METRIC Machine Screws - Thread Dimensions & Mech. Req. - ISO 898-1 & 965 DIN 13 |
2 |
| METRIC Nuts - Cap, Domed Hex Class 6 - DIN 1587 |
1 |
| METRIC Nuts - Hex Flange Style 1 - ISO 4161 |
1 |
| METRIC Nuts - Hex Jam - ISO 4035 & DIN 439B |
1 |
| METRIC Nuts - Hex Nuts Style 1 & Class 6 - ISO 4032 & DIN 934 |
1 |
| METRIC Nuts - Hex Nuts Style 2 Class 12 - ISO 4033 |
1 |
| METRIC Nuts - Hex Nuts Style 2 Class 9 - ISO 4033 |
1 |
| METRIC Nuts - Hex Nuts, Style 1 Class 8 & 10 - ISO 4032 & DIN 934 |
2 |
| METRIC Nuts - K Lock (w/ext tooth lockwshr) - DIN 934K |
1 |
| METRIC Nuts - Nylon Insert Lock, Heavy Ptrn - ISO 7041 & DIN 982 |
1 |
| METRIC Nuts - Nylon Insert Lock, Reg. Pattrn - DIN 985 |
1 |
| METRIC Nuts - Nylon Insert Stop, Reg. Pattrn - ISO 7040 |
1 |
| METRIC Nuts - Wing, Cold Forged - DIN 3155 |
1 |
| METRIC Nuts - Wing, Malleable Cast - DIN 315 |
1 |
| METRIC Self Tapping Screws - Head Dimensions- Flat - ISO 1482&7050, DIN 7972B&7982B |
1 |
| METRIC Self Tapping Screws - Head Dimensions- Hex - ISO 1479 & DIN 7976B |
1 |
| METRIC Self Tapping Screws - Head Dimensions- Oval - ISO 1483&7051, DIN 7973B&7983B |
1 |
| METRIC Self Tapping Screws - Head Dimensions- Pan - ISO 1481&7049, DIN 7971B&7981B |
1 |
| METRIC Self Tapping Screws - Type C (Gimlet point) - ISO 1478, 2702 & 4759-1 |
1 |
| METRIC Self Tapping Screws - Type F (Blunt point) - ISO 1478, 2702 & 4759-1 |
1 |
| METRIC Sems Machine Screws - Pan Phillips, Split Lockwasher - ISO 7045 |
1 |
| METRIC Sems Machine Screws - Small Pan Hd, Double Washer - JIS B 1188 |
1 |
| METRIC Sockets - Button Hd Socket Cap, Cl 10.9 - ISO 7380 |
1 |
| METRIC Sockets - Flat Head Socket Cap, Cl 10.9 - ASME B18.3.5M |
1 |
| METRIC Sockets - Set Screws-Cone,Flat,Cup & Dog - ISO 4026, 4027, 4028 & 4029 |
4 |
| METRIC Sockets - Shoulder Screws, Class 12.9 - ISO 7379 |
2 |
| METRIC Sockets - Socket Head Cap Screws Cl 12.9 - ISO 4762 & DIN 912 |
1 |
| METRIC Thread Rolling Screws - Trilobular Design - Thread, Head & Hole Data Specs |
3 |
| METRIC Threads, External - Class 5g/6g (for Sockets) - ISO 965 |
1 |
| METRIC Threads, Internal - Class 6H - DIN 13, ISO 68 & ISO R 1501 |
1 |
| METRIC Washers, Flat - DIN 125A |
1 |
| METRIC Washers, Flat - Various Series - ISO 7089, 7091, 7092 & 7093 |
4 |
| METRIC Washers, Lock - Combo External-Internal Tooth - DIN 6999 D & JIS B 1255 |
1 |
| METRIC Washers, Lock - Countersunk External Tooth - DIN 6797 V & JIS B 1255 |
1 |
| METRIC Washers, Lock - Curved Spring style - DIN 128A & 128B |
1 |
| METRIC Washers, Lock - External Tooth - DIN 6797 A & JIS B 1255 |
1 |
| METRIC Washers, Lock - Internal Tooth - DIN 6797 J & JIS B 1255 |
1 |
| METRIC Washers, Lock - Regular Split - DIN 127B |
1 |
| Machine Screws - Head Dimensions - 82 & 100-degree Flat Heads |
1 |
| Machine Screws - Head Dimensions - Combo Round & Combo Truss |
1 |
| Machine Screws - Head Dimensions - Fillister & Torx(R) Pan |
1 |
| Machine Screws - Head Dimensions - Flat Undercut |
1 |
| Machine Screws - Head Dimensions - Hex & Hex Washer,Slot & Unsltd |
1 |
| Machine Screws - Head Dimensions - Oval |
1 |
| Machine Screws - Head Dimensions - Oval Undercut |
1 |
| Machine Screws - Head Dimensions - Phillips Hex Washer |
1 |
| Machine Screws - Head Dimensions - Round & Phillips Binding |
1 |
| Machine Screws - Head Dimensions - Slotted, Phillips & Combo Pan |
1 |
| Machine Screws - Head Dimensions - Square Recess Flat & Pan |
1 |
| Machine Screws - Head Dimensions - Torx(R) Flat & Torx(R) U-Cut |
1 |
| Machine Screws - Head Dimensions - Truss & Slotted Binding |
1 |
| Machine Screws - Head Dimensions - Type 1A (Pozidriv) Flat & Pan |
1 |
| Machine Screws - Thread Dimensions, Mechanical - and Performance Requirements |
2 |
| Nuts - Cage, Spring Steel - Sq nut retained in steel cage |
1 |
| Nuts - Cap (Acorn), Closed End - One & Two Piece Construction |
1 |
| Nuts - Cap, Open End |
1 |
| Nuts - Castle, Hex |
1 |
| Nuts - Coupling, Hex |
1 |
| Nuts - Finished Hex - Grade 2, Galvanized, Stainless |
2 |
| Nuts - Finished Hex - Grade 5 & Grade 8 |
2 |
| Nuts - Flange, Large, Hex - (No Serrations) |
1 |
| Nuts - Heavy Hex - Grades A, C, 2H, DH & DH3 |
2 |
| Nuts - Jam, Hex |
1 |
| Nuts - Machine Screw, Hex - Small Pattern |
1 |
| Nuts - Machine Screw, Hex & Square |
1 |
| Nuts - Panel, Hex |
1 |
| Nuts - Slotted, Hex |
1 |
| Nuts - Square, Heavy Style |
1 |
| Nuts - Square, Regular Style |
1 |
| Nuts - Tee, Straight Barrel - 3 Prong & 4 Prong |
1 |
| Nuts - Wing, Cold Forged |
1 |
| Nuts - Wing, Stamped |
1 |
| Nuts - Wing, Washer-based - Zinc Alloy |
1 |
| Nuts, Clinch - Self Clinching |
1 |
| Nuts, Lock - Conduit - Zinc Alloy |
1 |
| Nuts, Lock - Flexible All Metal - Heavy Hex, Full Height |
1 |
| Nuts, Lock - Flexible All Metal - Heavy Hex, Thin Height |
1 |
| Nuts, Lock - Flexible All Metal - Light Hex, Full Height |
1 |
| Nuts, Lock - Flexible All Metal - Light Hex, Thin Height |
1 |
| Nuts, Lock - K-Lock w/external tooth L/W |
1 |
| Nuts, Lock - Nylon Insert, Hvy Hex Full Ht. - (NU Series) |
1 |
| Nuts, Lock - Nylon Insert, Hvy Hex Thin Ht - (NTU Series) |
1 |
| Nuts, Lock - Nylon Insert, Light Hex Stand. - (NM & NE Series) |
1 |
| Nuts, Lock - Nylon Insert, Light Hex, Gr-8 - (NU8 Series) |
1 |
| Nuts, Lock - Nylon Insert, Lt Hex, Thin Ht. - (NTM & NTE Series) |
1 |
| Nuts, Lock - Serrated Flange, Hex |
1 |
| Nuts, Lock - Stover Grade C & Grade GT, Hex |
2 |
| Nuts, Lock - Two Way Reversible Hex |
1 |
| Nuts, Spring - Flat type |
1 |
| Nuts, Spring - J type |
1 |
| Nuts, Spring - U type |
1 |
| Nutsetters - Magnetic |
1 |
| Nylon Fasteners - Flat Washers |
1 |
| Nylon Fasteners - Hex Nuts |
1 |
| Nylon Fasteners - Pan Slotted Machine Screws |
1 |
| Nylon Fasteners - Shoulder Washers |
1 |
| Pins, Clevis - Steel |
1 |
| Pins, Cotter - Extended Prong, Chisel Point - Steel |
1 |
| Pins, Dowel - Standard Series - Alloy Steel |
1 |
| Pins, Grooved - Types A, E, F, G & H - Carbon or Alloy Steel & SS |
1 |
| Pins, Spring - Slotted type - Steel & Stainless |
1 |
| Pins, Taper - Commercial & Precision Class - Steel |
1 |
| Pipe Plugs, Socket - Dry Seal |
1 |
| Pipe Plugs, Socket - Flush Seating |
1 |
| Plating Information |
3 |
| Plow Bolts - Clipped Head, Grade-5 |
1 |
| Plow Bolts - Grade-5 & Grade-8 |
2 |
| Retaining Rings - E Rings - Spring Steel & Stainless |
1 |
| Retaining Rings - External Type SH - Spring Steel & Stainless |
2 |
| Retaining Rings - Internal Type HO - Spring Steel & Stainless |
2 |
| Rivets, Blind - All Stainless Rivet & Mandrel - Dome head |
2 |
| Rivets, Blind - Alum, Steel & SS w/Stl Mandrel - Countersunk head |
1 |
| Rivets, Blind - Aluminum Rivet, Alum Mandrel - Countersunk head |
1 |
| Rivets, Blind - Aluminum Rivet, Alum Mandrel - Dome head |
3 |
| Rivets, Blind - Aluminum Rivet, Steel Mandrel - Dome head |
3 |
| Rivets, Blind - Copper Rivet, Steel Mandrel - Dome head |
2 |
| Rivets, Blind - Grip Range & Hole Size Guide - With Part Number Key |
1 |
| Rivets, Blind - Large Flange - Aluminum & Steel variations |
3 |
| Rivets, Blind - Large Flange - Stainless Rivet, Steel Mandrel |
1 |
| Rivets, Blind - Stainless Rivet, Steel Mandrel - Dome head |
1 |
| Rivets, Blind - Steel Rivet, Steel Mandrel - Dome head |
3 |
| Rivets, Bulbing-type - All Aluminum - Dome head (3-Star brand) |
1 |
| Rivets, Closed End - Aluminum Rivet, Steel Mandrel - Dome head |
1 |
| Rivets, Closed End - Steel Rivet, Steel Mandrel - Dome head |
1 |
| Rivets, Closed-End - Aluminum Rivet, Steel Mandrel - Countersunk head |
1 |
| Rivets, Drive - Brazier head - All Aluminum & Alum/Stainless |
2 |
| Rivets, Drive - Countersunk Head - All Aluminum & Alum/Stainless |
2 |
| Rivets, Drive - Liner head - All Aluminum |
1 |
| Rivets, Drive - Universal head - Aluminum,Steel,Alum/Stainless |
2 |
| Rivets, Full Tubular - Oval, Truss & Flat Countersunk |
1 |
| Rivets, High Strength - Dome head (Orlock brand) - All Aluminum & All Steel |
1 |
| Rivets, High-Strength - Countersunk (Orlock brand) - All Aluminum & All Steel |
1 |
| Rivets, Monobolt - Structural Rivet - Protruding, Lrg Flng & Cntrsnk |
1 |
| Rivets, Multi Grip - All Stainless Rivet & Mandrel - Dome head |
1 |
| Rivets, Multi Grip - Aluminum Rivet, Steel Mandrel - Brazier head |
1 |
| Rivets, Multi Grip - Aluminum Rivet, Steel Mandrel - Countersunk head |
1 |
| Rivets, Multi Grip - Aluminum Rivet, Steel Mandrel - Dome head |
1 |
| Rivets, Multi Grip - Aluminum Rivet, Steel Mandrel - Large Flange |
1 |
| Rivets, Multi Grip - Aluminum Rivet, Steel Mandrel - Low Profile head |
1 |
| Rivets, Multi Grip - Steel Rivet, Steel Mandrel - Dome, Countersunk & Lrg Flange |
1 |
| Rivets, Multi Grip - Steel Rivet, Steel Mandrel - Type "US" Low Profile Head |
1 |
| Rivets, Semi tubular - 120 degree Countersunk Flat hd |
1 |
| Rivets, Semi tubular - 150 degree Countersunk Flat hd |
1 |
| Rivets, Semi tubular - Oval head |
1 |
| Rivets, Semi tubular - Truss head |
1 |
| Rivets, Solid - Button head - Steel |
1 |
| Rivets, Solid - Flat Countersunk head - Steel |
1 |
| Rivets, Solid - Flat head - Steel |
1 |
| Rivets, Solid - Pan head - Steel |
1 |
| Rivets, Split - Flat Countersunk head - Steel |
1 |
| Rivets, Split - Oval head - Steel |
1 |
| Self Drilling Screws - Extra Long (#4 & #5) Points - Thread, Point & Material Specs |
1 |
| Self Drilling Screws - Modified Truss Head - Thread, Head & Material Specs |
1 |
| Self Drilling Screws - Trim Head - Dimensional & Material Specs |
1 |
| Self Drilling Screws - Type BSD and Type CSD - Thread, Point & Material Specs |
2 |
| Self Drilling Screws - Wafer Head w/Nibs - For use with Cement Board |
2 |
| Self Drilling Screws - with EPDM Washers - Thread,Point,Wash & Mat'l Spec |
1 |
| Self Piercing Screws - Slotted Hex Washer head - Head, Thread & Material Specs |
1 |
| Self Tapping Screws - Head Dimensions - 82 degree Flat head |
1 |
| Self Tapping Screws - Head Dimensions - Bugle and Pan heads |
1 |
| Self Tapping Screws - Head Dimensions - Flat Undercut |
1 |
| Self Tapping Screws - Head Dimensions - Hex & Hex Washer Phillips |
1 |
| Self Tapping Screws - Head Dimensions - Hex & Hex Washer Slotted |
1 |
| Self Tapping Screws - Head Dimensions - Oval |
1 |
| Self Tapping Screws - Head Dimensions - Oval Undercut |
1 |
| Self Tapping Screws - Head Dimensions - Round and Round Washer Heads |
1 |
| Self Tapping Screws - Head Dimensions - Square Recess Flat & Pan |
1 |
| Self Tapping Screws - Head Dimensions - Torx(R) Flat & Torx(R) Fl UCut |
1 |
| Self Tapping Screws - Head Dimensions - Torx(R) Pan & Combination Pan |
1 |
| Self Tapping Screws - Head Dimensions - Truss & Wafer heads |
1 |
| Self Tapping Screws - Heat Treating Information |
1 |
| Self Tapping Screws - High Low Screws - Head, Thread & Material Specs |
3 |
| Self Tapping Screws - Hole Size Data |
2 |
| Self Tapping Screws - Serrated Hex Washer Type AB - Head & Material Specs |
1 |
| Self Tapping Screws - Type A - Thread & Material Specs |
1 |
| Self Tapping Screws - Type AB - Thread & Material Specs |
1 |
| Self Tapping Screws - Type B - Thread & Material Specs |
1 |
| Sems Machine Screws - Head Dimensions - Hex & Hex Washer,Slot & Unsltd |
1 |
| Sems Machine Screws - Head Dimensions - Pan Head, Phillips & Slotted |
1 |
| Sems Machine Screws - Head Dimensions - Six-lobe Pan |
1 |
| Sems Machine Screws - Mechanical & Performance Specs - Washer Specs |
3 |
| Sems Machine Screws - Thread Dimensions |
1 |
| Sockets - Button Head Socket Cap Screw - Alloy Steel |
1 |
| Sockets - Flat Head Socket Cap Screws - Alloy Steel |
2 |
| Sockets - Hex Keys (Wrenches) & Bits - Alloy Steel |
2 |
| Sockets - Low Head Socket Cap Screws - Alloy Steel |
1 |
| Sockets - Set Screws, Alloy Steel - Cup,Oval,Flat,Cone & 1/2Dog Pt |
2 |
| Sockets - Shoulder Screws - Alloy Steel |
2 |
| Sockets - Socket Head Cap Screws - Alloy Steel |
4 |
| Sockets - Socket Head Cap Screws - Stainless Steel |
4 |
| Spacers - Hex |
1 |
| Spacers - Hex Swage |
1 |
| Spacers - Round Swage |
1 |
| Square Bolts |
1 |
| Standoffs - Hex Threaded Female |
1 |
| Standoffs - Male-Female, Hex & Round |
1 |
| Standoffs - Round Threaded Female |
1 |
| Standoffs, Self-Clinching - Blind style - 303 Stainless Steel |
2 |
| Step Bolts |
1 |
| Structural Bolts - Heavy Hex - ASTM A325 & ASTM A490 |
2 |
| T-Head Bolts |
1 |
| Tap Bolts, Hex - Grades 2, 5 & 8 - Fully Threaded |
2 |
| Tension Control Bolts - A325 |
2 |
| Thread Cutting Screws - Type 1 - Thread & Material Specs |
1 |
| Thread Cutting Screws - Type 23 - Thread & Material Specs |
1 |
| Thread Cutting Screws - Type 25 - Thread & Material Specs |
1 |
| Thread Cutting Screws - Type F - Thread & Material Specs |
1 |
| Thread Cutting Screws - Type F Floorboard Screws - Head, Thread & Material Specs |
2 |
| Thread Rolling Screws - Plastite 48-2 - Thread & Material Specs |
1 |
| Thread Rolling Screws - Taptite II - Thread, Material & Hole Specs |
5 |
| Threads, External - Class 2A |
1 |
| Threads, External - Class 3A - (for Socket Screws) |
1 |
| Threads, Internal - Class 2B |
2 |
| Thumb Screws - Plain & Shoulder Pattern |
1 |
| Toggle Bolts - Round & Mushroom heads |
1 |
| Toggle Wings |
1 |
| Track Bolts, Slotted - Rib Neck - Grade-2 & Grade-5 |
1 |
| Washers, Beveled |
1 |
| Washers, Countersunk Finishing |
1 |
| Washers, Dock - Steel |
1 |
| Washers, Fender |
1 |
| Washers, Flat - 18-8 Stainless |
1 |
| Washers, Flat - 316 Stainless |
1 |
| Washers, Flat - Machine Screw style |
1 |
| Washers, Flat - Round Structural per ASTM F436 |
1 |
| Washers, Flat - SAE Extra Thick, Thru-Hardened |
1 |
| Washers, Flat - SAE Low Carbon Steel |
1 |
| Washers, Flat - SAE Through Hardened |
1 |
| Washers, Flat - USS Extra Thick, Thru-Hardened |
1 |
| Washers, Flat - USS Low Carbon Steel |
1 |
| Washers, Flat - USS Through Hardened |
1 |
| Washers, Lock - Combo External-Internal tooth |
1 |
| Washers, Lock - Countersunk External tooth |
1 |
| Washers, Lock - External tooth |
1 |
| Washers, Lock - Heavy Split |
1 |
| Washers, Lock - High Collar Split |
1 |
| Washers, Lock - Internal tooth |
1 |
| Washers, Lock - Regular & High Alloy Split |
1 |
| Washers, Tension Indicating - Used w/Structural Fasteners - Used w/Gr-5 & Gr-8 Fasteners |
2 |
| Weld Nuts - Center Hole - Multiple Projections |
1 |
| Weld Nuts - Center Hole - No Projections |
1 |
| Weld Nuts - Offset Hole - No Projections |
1 |
| Weld Nuts - Offset Hole - Single Projection |
1 |
| Weld Screws - Bottom Projection style |
1 |
| Weld Screws - Flat 90-Degree Spade - No Projections |
1 |
| Weld Screws - Top Projection style |
1 |
| Wing Screws - Type A (Cold Formed) |
1 |
| Wing Screws - Type D (Stamped Wing) |
1 |
| Wood Screws - Head Dimensions - Flat & Oval heads |
1 |
| Wood Screws - Head Dimensions - Round head |
1 |
| Wood Screws - Thread & Body Dimensions - Cut & Rolled thread types |
1 |
|
1 |
